Mattei air compressor,Air compressor,compressor,Screw air compressor,air compressors parts,The global network of air compressor


100 SERIES from 1,5 to 3 kW	200 SERIES from 1,1 to 3 kW	400 SERIES 4 and 5,5 kW	500 SERIES from 4 to 15 kW

1000 SERIES from 15 to 22 kW

Mattei air compressor mattei Vane air compressor air compressor mattei compressor Mattei air compressor mattei Vane air compressor


2000 SERIES from 30 to 55 kW	3000 SERIES 55 and 75 kW	4000 SERIES from 55 to 110 kW	8000 SERIES from 132 to 200 kW


OPTIMA Series from 11 to 90 kW	MAXIMA Series from 35 to 110 kW	ENERGY SAVING M.I.E.M	Heat Recovery

Multicomp II (Master Controller for Multiple Compressor Installations)	Control System "Maestro"	Control System "MicroC"


HTMD Dryers Compressed Air Refrigerant Dryers	MD Dryers Compressed Air Refrigerant Dryers	Filters	Receivers

Condensate Drains

These rotary vane compressors have been tested to operate in the most heterogeneous and hard conditions. Among their main characteristics are low fuel consumption, reduced maintenance, high performances and reliability.

• Technical Features

DRW 714 - 1010

DRW 721 - 728 - 733

DRW 748 - 756

Generating Sets with IVECO Aifo Engines from 30 to 500 kVA

AF Series

Generating Sets with MAN Engines from 300 to 660 kVA

MAN Series

Generating Sets with MTU Engines from 645 to 2200 kVA

M Series

Generating Sets with PERKINS Engines from 44 to 2250 kVA

PK Series

Generating Sets with VOLVO Engines from 85 to 550 kVA

V Series

Cogeneration Sets with IVECO Aifo Engines from 42 to 405 kVA

MG Series

Cogeneration Sets with DEUTZ, MAN, PERKINS, WAUKESHA Engines from 40 to 800 kVA

Special Installations

ENERGY SAVING REFRIGERATING DRYERS
Water vapour in compressed air installations can cause pipes' erosion, wear of pneumatic tools and hydraulic losses in pneumatic cylinders, with serious damages to production or products' quality. By installing Mattei's HTMD dryers, these effects can be avoided.

• Technical Features HTMD Series

HTMD

Mattei's coalescing compressed air FM series filters can guarantee clean air at 100%, thanks to specific materials.

• Technical Features FM Series

GRADE C4
Dust filter
Dust retention filter to remove solid particles up to 25 micron. It is suitable as a prefilter in a plant where compressed air is produced by compressors not equipped with an effective filtering and oil removing system. Maximum working temperature: 100 ��C.

GRADE C3
Prefilter
Prefilter removing solid particles larger than 5 micron and liquid particles up to 5 mg/m³. It is suitable as initial protection for a compressed air system or a refrigerant dryer, for general application in pneumatic devices, as a prefilter for ��C2�� grade filters and as a post-filter for adsorption dryers. Maximum working temperature: 100 ��C.

GRADE C2
Oil removing filter
This coalescing filter removes solid particles up to 1 micron and liquid particles up to 0,1 mg/m³. It is suitable to remove large oil quantities. Maximum working temperature 100 ��C.

GRADE C1
Oil removing filter
Coalescing filter removing solid particles up to 0,1 micron and liquid particles up to 0,01 mg/m³. This filter is required for an effective retention of the oil residue, around 99,99%, and delivers technically oil free air. Maximum working temperature 100 ��C.

GRADE CC
Activated carbon filter
It is used to eliminate oil vapours and odours and for the final treatment of compressed air. The filtering element is made of activated carbon, with an external steel mesh. The adsorption principle removes vapours and residual odours of the oil retention process. A grade C1 filter should be always placed before it. Maximum working temperature 60 ��C.