New Compressor Blocks for Breathing Air and Industry

The new XINRAN compressor blocks are used both for breathing air and industrial compressor units. Durability, reliability and high quality manufacturing guarantee long and trouble-free operation of the units.

The New High Pressure Final Stage The Heavy Duty Driving Gear		The Newly Developed Low Pressure Lubricating System

The new compressor blocks are fitted as standard with intermediate coolers and an after-cooler made of stainless steel, lasting for years even under the most violent and unfavourable environmental conditions.
Besides the extraordinary corrosion resistance, the stainless steel coolers mainly provide thermal stability. The coolers and fittings remain airtight for years.

The New High Pressure Final Stage
The new high pressure final stage is fitted with piston rings made of a newly developed high tech synthetic material which has proven its superb anti-abrasive properties in long-term tests.
Due to this new technology, oil consumption has been reduced. This advancement has made the compressor run smoother and increased its life.

The Heavy Duty Driving Gear
All compressor blocks in this production range are equipped with a heavy duty driving gear, suitable for continuous operation.
Long lasting, indestructable industrial roller bearings provide minimum friction. This coupled with hardened cylinders and the new lubricating system make these compressors highly economical.

The Newly Developed Low Pressure Lubricating System
The newly developed low pressure lubricating system features a low speed gear pump, directly coupled to the crankshaft.
The lube-oil is cleaned by an easily replaceable micro filter cartridge. This considerably increases the lifetime of moving parts in the compressor, too.

	4300 psi/300bar or 6000psi/415bar max.pressure
	• MP330 compressor w.4300psi/300bar max. pressure, all types • MP400 compressor w.6000psi/415bar max. pressure, SCA600HDFS only
	Pressure Switch 300 to 200 bar
	• Manual pressure switch 300-200 bar (4300-3000 psi) • With MP330 compressor working pressure 300 bar only • SCA100/140/215/265
	Automatic Condensate Drain with Timer
	• Fully Automatic condensate drain system • Hour meter • On/Off Switch • SCA80E/100E electric compressors only
	Automatic Condensate Drain with Timer and Automatic shut-off
	• Fully Automatic condensate drain system • Final pressure switch with gauge • Aautomatic shut-off pressure switch • Hour meter • On/Off Switch • SCA140E/215E/265E electric compressors only
	Hour Meter Digital
	• Digital hour meter • SCA100/140/215/265 Gas Engines only
	Hour Meter Analog
	• Analog hour meter • SCA100/140/215/265 electric Engines only
	Interstage Pressure Gauges
	• Pressure gauges installed after each stage • Easy to monitor all three stages of compression • SCA140/215/265 compressors only
	Filling Panel Econo with Four (4) Outlets
	• Small Filling Panel with four (4) outlets (showed w/SCA80 compressor) • Four (4) Filling hose with on/off valve (DIN or INT) and bleed • 220bar/3200psi or 300bar/4400psi • Dimensions: 19x36 cm • SCA80/100/140/215/265 all models (not sold sepparately)
	Carry Handels
	• Removable carry handels • Easy to fixed • SCA140/215/265 (not sold sepparately)
	Intake Hose
	• Six foot intake hose with fitting (Intake Filter not included) • Recomand for gas and diesel engines • SCA100/140/215/265

3 - 250 SCFM / 350 - 7000 PSIG / ISO 9001 Quality

The Heart of the System - The Compressor

The Complete Range

3 STAGE / 3 - 7.5 HP 10 & 12 Range 4 STAGE / 7.5 - 10 HP 12.14 Range 4 & 5 STAGE / 10 - 20 HP 15 & 18 Range 3 & 4 STAGE / 25 - 30 HP 22 Range 3 & 4 STAGE / 30 - 50 HP 23 Range 3, 4 & 5 STAGE / 50 - 150 HP 25 & 28 Range

The XINRAN Advantages for Your Benefit

• Available in a Wide Range of Capacities to Meet Your Requirements
  
  
• Proven Air Cooled Design - Economical, Reliable, Environmentally Friendly
  
  
• Roller and Needle Bearings Used at All Bearing Surfaces for Reduced Friction and Heat, Improved Mechanical Efficiency and Extended Oil Life
  
  
• Heavy-Duty Roller Bearings for Strong Support of the Crankshaft and Long Bearing Life
  
  
• Counterbalanced Crankshaft for Smooth, Practically Vibration-Free Operation for Extended Life and Requires No Special Foundation
  
  
• Corrosion Resistant Materials for All Coolers and Separators
  
  
• Large Surface Area and Fine Ribbing on Cylinders for Efficient Heat Dissipation
  
  
• Pressurized Lubrication with Oil Filter for Reliable Lubrication of Internal Components
  
  
• Readily Accessible Valves - No Major Disassembly Required for Inspection and Maintenance
  
  
• Extended Maintenance Intervals Due to Efficient Cooling and Pressure Lubrication
  
  
• Affordable Genuine Replacement Parts for Quality Repairs
  
  
• Intake Filter for Protection of the Internal Components of the Compressor
  
  
• Encapsulated Crankcase to Protect the Environment, No Oil Laden Mist
  
  
• Automatic Condensate Drain for Automatic Drainage of the Interstage and Final Separators and Unloaded Starting