CompAir Rotary Vane Air Compressors The Hydrovane series rotary vane compressors are versatile, powerful, reliable and cost effective. They can be found in trains, ships, engineering, distilling, brewing, packaging sites and in large and small industrial units through the world. In fact they are the perfect business solution to your requirement for reliable, high quality compressed air. The low noise operation of the Hydrovane air compressors means that they can be installed right alongside your equipment. Most models are available either as open units or fitted with enclosure panels which further reduce noise levels. The design concept The well proven combination of the Hydrovane compressor directly driven by an Eff1 energy efficient electric motor. Auto-idle further increases efficiency by reducing off load running costs to less than 3% of full load power. Manual operation is also available for users with constant air demands where a continuous supply of constant pressure is required. HV07 The rotary vane principle he key to the success of the Hydrovane compressor is the unique rotary vane principle. The compressor operates at a very low speed providing total reliability and long component life. The rotor, the only continually moving part, has a number of slots into which fit sliding vanes that ride on a film of oil. The rotor rotates within the stator. During rotation, centrifugal force extends the vanes from their slots, forming individual compression cells. (See HV07 pictured left)

Aircentre HV05 Integrated Compressor and Dryer   Aircentre - Combined compressor and dryer the HV04 to HV07 Range (see HV07 Above) is also available as an integrated compresssor and dryer, a compact ready for operation packaged Aircentre. This benefits from a small footprint and is easy to install, transport and relocate, fitting through the size of a standard doorway, with a single connection for compressed air and easy connections for power. Matched to the compressor the dryer unit is capable of delivering air dried to a constant pressure dewpoint of 3oC with no requirement for a refrigeration control valve, avoiding readjustments. With air quality and dryer reliability assured, the dryer unit switches off once dewpoint is reached and comes complete with large easy to change air filters which combine with an inlet moisture separator to guarantee the best performance possible.

Simplicity The single rotor design, running at standard motor speeds allows direct drive arrangement. Efficiency Rotary sliding vane, single stage oil sealed compression element directly driven by an Eff1, IP55 motor. Europe's highest standard in motor efficiency. Reliability A reliable compressed air supply is a necessity. With over half a million Hydrovane compressor users world wide, we know we can satisfy your requirements. Versatility In-built pressure control ensures the compressor exactly matches air demand. Engineered for global markets, the compressors are rated for continuous operation in ambients up to 45 deg C. Click here to see an animation of this process

Significant Energy Savings   HV37RS Single speed compressors offer the best efficiency when delivering 100% capacity, however there is an energy loss when operating at part load. Using state-of-the-art inverter control, the HVRS series efficiently regulate compressor speed to precisely meet air system demand. Other features of these HVRS series compressors include 'Supersoft' controlled start and stop, customer adjustable 'system pressure' and simple installation with a ready to run package. Downloads Download Hydrovane literature Download Hydrovane USA version literature   Hydrovane rotary vane compressors   Performance F.A.D. l / s (cfm) Motor Power Oil Capacity  Noise levels Air outlet Dimensions  Weight Model  7 bar 8 bar 10 bar kW (hp) Litres dBA (open / encl) RP Length (open / encl) Width Height kg (open / encl) HV01 - - 1.96 (4.2) 1.1 (1.5) 1 62 3/8 700 / *1153 270/ *300 470/ *681 35 * 72 HV02 - - 3.7 (7.9) 2.2 (3.0) 35 * 83 HV04 11 (24) - 9 (20) 4 (5.5) 3 66 3/4 680 470 1050 152 HV05 15 (32) - 12 (25) 5.5 (7.5) HV07 21 (44) - 17 (35) 7.5 (10) 67 156 HV07RS 0 - 20 (0 - 42) 160 HV11 - 29 (61.4) 24.5 (51.9) 11 (15) 5.7 76 / 72 3/4 1578 / 1684 610 976 291 / 341 HV15 - 38 (80.5) 33.3 (70.6) 15 (20) 78 / 74 1627 / 1648 324 / 374 HV15RS 0 - 39 (0 - 83) 620 339 / 389 HV18 - 49 (103.8) 42.3 (89.7) 18 (25) 13.6 76 / 72 1 1772 / 1778 610 1087 428 / 480 HV22 - 60 (127.1) 52 (110.2) 22 (30) 78 / 74 HV22RS 0 - 56 (0 - 119) 620 443 / 495 HV30 - 78 (165) 72 (152) 30 (40) 80 2010 867 920 510 HV37 - 94 (199) 87 (185) 37 (50) 14.5 84 1.5 2114 910 1058 560 HV37RS 0 - 95 (0 - 200) 84 2108 965 940 771 HV45 - 114 (242) 100 (210) 45 (60) 24 84 2141 910 1058 620   HV07RS, HV15RS, HV22RS & HV37RS regulated speed Hydrovane compressors Model Performance F.A.D l / s (cfm) Motor Power Oil Capacity Noise levels Air outlet Dimensions Weight kW (hp) Litres dBA (open / encl) RP Length (open / encl) Width Height kg (open / encl) HV07RS 0 - 20 (0 - 42) 7.5 (10) 3 67 3/4 680 470 1050 160 HV15RS 0 - 39 (0 - 83) 15 (20) 5.7 78/74 3/4 1627 / 1648 620 976 339/389 HV22RS 0 - 56 (0 - 119) 22 (30) 13.6 78/74 1 1772 / 1778 620 1087 443/495 HV37RS 0 - 95 (0 - 200) 37 (50) 14.5 84 1.5 2108 965 940 771

Piston air compressor reliability CompAir has traditionally been a market leader in piston compressor design. The current versatile range has a design heritage and proven reliability and efficiency second to none. Piston compressors still provide one of the most energy efficient means of compressing air especially for applications where oil-free must be guaranteed. Piston compressors are in a class of there own for low pressure applications such as materials handling. and high pressure applications such as PET bottle blowing and breathing air cylinder charging systems. Pressures range from 1.5 to 414 bar g (20 to 6000 psig) Powers range from 0.75kW to 420kW (1 to 560 hp) Versatility The CompAir piston range is a versatile range with uses as booster compressors, vacuum pumps and for compressing gasses other than air as well as the low pressure and oil-free variants. Within CompAir M series and R series piston compressors come under the Industrial division. H Series compressors come under the High pressure division.   M Series Small Piston M series compressors M series compressors are available in lubricated models from 0.75 to 22kw (1 to 30 hp) and a maximum working pressure of 15 bar g (218 psig) Oil free models are available from 0.75 to 4kW (1 to 5.5 hp) and a maximum working pressure of 10 bar g (145 psig) The simple and reliable design of the M series compressors means that they can be supplied or installed in a number of ways including baseframe mounted, horizontal or vertical air receiver mounted, multiple compressors on one receiver and also with or without sound proof enclosures. Downloads Download M series literature   R Series Piston V Major   R series compressors R series compressors have been in production since the 1920's with a policy of constant improvements in design and materials. many thousands are in service around the world, providing long term, reliable energy efficient compressed air in every industry and environment. Oil-free 100% guaranteed The R-series are available with oil free cylinders for applications where oil cannot be tolerated in the air or gas being compressed. Extended piston rods have non-lubricated packings and self lubricating PTFE piston rings run in corrosion resisting austenitic iron cylinder liners. Versatility With over forty models available the CompAir R series has a versatility to meet a wide range of applications. The product can be suitably adapted to perform in hostile environments. Additional instrumentation can be easily fitted to suit particular requirements. The R series compressors can use a variety of power sources, including high or low voltage motors, steam turbines or diesel engines via either direct coupling or belt drive. Speeds can be adjusted to match compressor outputs for any specific requirements. The entire range can be water cooled with air cooling also available on certain models. Long term reliability and energy efficiency Hard wearing reliability under all conditions has been designed into CompAir R series piston compressors. Accurate manufacturing tolerances and advanced running systems makes the R series exceptionally efficient. Energy consumption is minimised, using automatic valve unloading to match variable air demand. More information R series V Major and V Compact brochure     H5205 high pressure compressor H5437M high pressure compressor H series high pressure compressors The CompAir H series compressor range sets the standard for heavy duty high pressure compressors for a multitude of industrial, marine, Navel and breathing air applications. Typical uses for these types of machines are in air blast switch gear, breathing air, motion compensation, engine starting, dockyard services, press accumulator charging, plastic bottle blowing, can forming, test rigs, tyre remoulding to name a few. Versatility The CompAir H series is an extensive range of water cooled, air cooled, multistage, 'V' or 'W' configuration compressors with a wide range of high pressure options between 10 and 414 bar g (145 to 6000 psig) to suit any application. The various models can be direct motor coupled or belt driven by electric motor diesel engine to suit your needs. The entire range is designed to maximise efficiency and reliability whist minimising compressed air discharge temperatures with high efficiency coolers and separators. Maintenance downtime and ownership cost is reduced with quick and simple access to all components. P.E.T. bottling Producing quality P.E.T. plastic bottles reliably time after time is the motive behind the CompAir range of compressors for the P.E.T. bottling market. HA50 hp breathing air Designed to produce quality oil-free air at pressures up to 50 bar g (725 psig) the range is a perfect balance between utilising existing CompAir technology and enhanced components in the running gear and lower pressure stages, along with a series of unique developments in the high pressure third stage. Providing high pressure at high performance demands and extreme tolerance to high temperature and wear. The CompAir solution incorporates state-of-the-art, high temperature PTFE composite piston rings and glands, together with a high pressure gland design which significantly improves operating life. The unique 'CD Ring' double acting piston ring provides a number of benefits compared to conventional designs such as increased volume flow, greater efficiency and increased life. Combine these design features with enhanced air cooling the CompAir package provides an intelligent air technology solution for P.E.T. bottle blowing applications. HBQ30 hp breathing air Breathing air The CompAir breathing air compressors have a strong reputation with fire brigades, dive schools commercial filling stations, military and navy alike. Incorporated into fully silenced cabinets and meeting all major world wide survey and certification requirements the CompAir breathing air quality exceeds BS EN 12021 and BS 4275. Optional integral or remote charging panels with independent charge and vent outlets can also be supplied. The design has also been incorporated into portable crash frames for use in all environments where silencing is not a primary consideration. The rugged construction permits safe transportation allowing reliable operation without risk of damage. A full range of ancillary breathing air equipment including fill stations, air testers, filtration upgrades, dew point monitors and air storage facilities are also available. C17GS   CompAir portable air compressors A wide variety of users rely on CompAir C series compressors when there is a demand for portable compressed air. Pressures range, depending on the model, from 7 to 24 bar g (100 to 350 psig). CompAir's experience in the design and manufacture of high quality and efficient portable compressors spans almost 200 years. Today's models, the result of an intensive development programme, deliver the high performance, features and reliability demand by users in a multitude of harsh environments. A versatile range for all applications With a range comprising of nearly 50 models there is a model to suit any application, from the smallest single axle model, powering a couple of pneumatic tools through to the powerful twin axle models with the unique 180o turntable steering for excellent manoeuvrability on confined sites. Easy access for operation and routine maintenance is standard across the range with well located control panels and simple lift off canopies or large access doors. Simultaneous pneumatic and electrical power on certain models Built in A/C generators allow the compressors to produce electrical power instead of compressed air. On the synchronous generator models sufficient energy is available to run pneumatic tools as well as running electrical powered machines such as immersion and sump pumps.     C76   Turboscrew Significant Fuel Savings Turboscrew solution to energy wastage The CompAir patented turboscrew design is a compression system with a radically new approach to energy conservation. It uses a Cummins turbo assisted engine powering a new CompAir screw compression unit with the addition of a second engine exhaust gas driven turbine pre-compressing the suctioned inlet air before it enters the compression chamber. The technical advantages are: Two stage compression with intermediate cooling Recovery for air compression of 5% of engine power expended in exhaust heat. Better synchronisation of engine speed and air intake valve response to air demand over a wide output. At outputs below 60% of maximum, compressor torque requirement reduces at the lower rotor speeds while torque of the Cummins engine increases at reduced so that further fuel is saved. Overall benefit Significantly greater compressor speed range and air delivery in which the turboscrew compressor efficiently. Fuel savings of up to 28% compared with conventional compressors of this size representing up to 20% of total lifetime costs.   New Extended Range The Turboscrew range has now been extended to seven models The two new models are the C210TS-12 providing 21 m3/min of air at 12 bar delivery pressure, and the C230TS-9 giving 23 m3/min at 8.6 bar. Other models in the range comprise of the C160TS-12 providing 16m3/min of air at 12 bar delivery pressure, and the C180TS-9 giving 18m3/min at 8.6 bar. These models have a shorter length and less width, in both tandom and heavy duty single axle form, they are designed for easy on-highway towing by van or 4 x 4. These compliment the C190TS-9 (21.0 m3/min at 8.6 bar), C200TS-10 (20.0 m3/min at 10 bar) and the C190TS-12 (19.0 m3/min at 12 bar). C160TS to C230TS Turboscrew Portable Compressors       Options to suit all requirements Across the C-series a wide range of options exist to tailor the compressor to your exact requirements. These include adjustable tow-bars, additional filtration, built in aftercoolers, tool lubricators, road lights, pneumatic hose reels , base mounting allowing for permanent installation on site or on the load area of a commercial vehicle and also customers own paint colour and signwriting. CompAir's Portable Compressor Ranges C14 to C25 Compressors provide outputs from 1.4 to 2.5 m3/min at a pressure of 7 bar g. Read more in the C14 to C25 brochure C30 to C76 Compressors provide outputs from 3.0 to 7.6 m3/min at pressures between 7 and 14 bar g. Read more in the C30 to C76 brochure C85 to C140 Compressors provide outputs from 8.5 to 13.3 m3/min at pressures between 7 and 14 bar g. Read more in the C85 to C140 brochure C160TS to C230TS Turboscrew Compressors provide outputs from 16 to 23 m3/min at pressures between 8.6 and 12 bar g. Read more in the C160TS to C230TS Turboscrew brochure C310 to C255-24 Large portable air compressors provide outputs from 18.4 to 31.1 m3/min at pressures between 7 and 24 bar g. Read more in the C310 to C255-24 brochure C750-125S to C1000-125S Large portable air compressors provide outputs from 21.2 to 28.3 m3/min at pressures between 8.6 to 11.7 bar g. Read more in the C750-125S to C1000-125S brochure C850-250(S) to C255-24 Two stage portable Air provide outputs from 18.4 to 25.5 m3/min at pressures between 17.2 to 24 bar g. Read more in the C850-250(S) to C255-24 brochure